A
SSEMBLY
S
TAGE
#1
Attach Stabilizers
Assembly Hardware Required:
#30
Button Head Allen Bolt
Qty. 2
#33
Button Head Allen Bolt
Qty. 2
#31
Curved Washer
Qty. 10
#34
Acorn Nut
Qty. 6
#35
Carriage Bolt
Qty. 4
Assembly Description:
A) Securely
fasten the
Front Stabilizer Assembly
(#2) to the
Base Assembly
(#1) using a combination; 2-
Button Head Allen
Bolts
(#30) and 4-
Curved Washers
(#31) and 2-
Acorn Nut
(#34) mounting front to back.. Then use 2-
Button Head Allen
Bolts
(#33) and 2-
Curved Washers
(#31) mounting from the top.
B)
Attach the Side
Stabilizer Extension Assemblies
(#3) to the side frame extrusions of the
Base Assembly
using 4-
Carriage
Bolts
(#35), 4-
Curved Washers
(#31), and 4-
Acorn Nuts
(#34) as shown above.
Assembly Notes:
Use the
Adjustable Levelers
(#50) located on the bottom of the Stabilizer End Caps to level the equipment and
prevent the base unit from rocking on an uneven surface. Lock the height adjustment in place by tightening the Jam Nut.
IMPORTANT:
Make sure to use the enclosed
lubricant
to coat the base rails. This will smooth the travel of the pedal movement,
as well as, eliminate any tracking or noise problems that may be caused by the rollers. Future application will depend on frequency
of use. We recommend using dry silicon based lubricants. (Reference Page 18)
♦
Assembly Stage #1 complete
A
SSEMBLY
I
NSTRUCTION
P
AGE
6
33
31
31
3
1
50
34
35
A
DJUSTMENT
L
EVELER
2
IMPORTANT: Apply Thin Coat of Lubricant to the Top of Each Base Rail
34
31
30
31
