Matrix III NET network (RS-485) controller
with built-in Mifare (13,56 MHz) reader
User Manual
1. GENERAL INFORMATION
Matrix III NET
device
is designed to read Mifare keys (cards, key fobs, etc. as per ISO 14443-
A), and to read and write protected memory sectors of Mifare 1K, 4K and Ultralight.
2. OPERATION MODES:
2.1
ACS Reader.
The
device
is connected to ACS (Access Control Systems) controllers via iButton (Dallas Touch
Memory), Wiegand-26 or Wiegand-34 protocols.
Mode 2.1.1.
The
device
transmits UID (Serial Number) of all cards (keys).
Mode 2.1.2.
The
device
transmits UID (Serial number) of only those cards (keys) that have
authorised (obtained access) to a certain sector.
Mode 2.1.3.
The
device
transmits the code from protected memory sector of a Mifare
key.
(To configure 2.1.2 and 2.1.3 modes, download and use free software from
M3NConf.zip
archive at
http://www.ironlogic.
me
2.2
PC Reader.
The Reader is connected to a PC through a converter, via RS-485 protocol.
Mode 2.2.1.
The reader reads and writes protected memory sectors of Mifare keys.
To work with the reader in this mode, use the
SDK Z-2 USB MF
libraries at
http://www.ironlogic.
me
To configure 2.1.2 and 2.1.3 modes, and to work in 2.2.1 mode, a Z-397 converter is necessary
(http://www.ironlogic.
me
The reader is connected via point-to-point RS-485 (not a network connection).
page 1
MATRIX
III NET
www.ironlogic.
me
Figure 1.
Elements layout.
To increase
the built-in beeper
volume, please
remove
the paper sticker.
Jumper layout
for this model.
Lithium battery socket
(not used in this model).
