Iron Ether Divaricator, Owner'S Manual

Page: 7 / 12

signal, which remains analog throughout
the signal path.
Low:
Controls the level of the low
frequencies, which are passed to the
output without further processing.
Hi/Loop:
Controls the level of the high
frequencies, which are processed by the
exciter and optionally routed through the
external effects loop.
A Tour of Sounds
Start with all knobs all the way down, and
switches down. Turn the Low knob to its
center position, and play. You'll hear only
the lowest frequencies of your sound. Now
turn the Hi/Loop and Thresh knobs up
and you'll begin to hear the high band
added back in.
Turn Hi/Loop all the way down and
begin turning X-Over up, stopping at a few
points in the knob's travel to play. In this
setting, the Divaricator functions as a non-
resonant 4-pole lowpass filter. This can be
useful for getting a very pure, deep bass