7
Copyright 2019 Iron Bow Technologies
System Installation
The vCLINiC should be mounted on a stable supporting structure such as a table top
stand, wall mount, monitor arm, or medical cart. Prior to installation, please refer to
for mounting holes locations and dimensions. Please note, a Phillips #1 and
#2 screwdriver is required for system assembly.
Installing the Camera
Before using the system for the first time, you need to mount and connect the camera to
the mounting panel located on top of the vCLINiC.
To install the camera on the vCLINiC:
1.
Remove camera assembly from packaging and place carefully on a table top.
2.
The system is supplied with a camera mounting plate and countersunk bolt to
attach the camera to the mounting plate.
3.
Ensure the rear connectors of the camera are located at the rear of the
mounting plate, as shown below:
Figure 3 - Attaching Camera to Mounting Plate
