21
Copyright 2019 Iron Bow Technologies
CLINiC Administration
You can modify the default functions of the Vidyo CLINiC by logging in as an
administrator to the VidyoRoom Admin UI and performing the desired changes.
For the complete set of instructions, please refer to the
VidyoRoom and VidyoPanorama
600 Administrator Guide
.
Accessing the Vidyo Admin Settings
To access the admin settings:
1.
Prior to accessing the administration functions, the Vidyo software
must access the internet and obtain an IP address. This is done via the
Vidyo administration screen on the display. Use the Vidyo remote
control setup button to enter the setup functions. In the Network Setup
menu, use DHCP to obtain an IP address, or enter a static IP address
manually.
2.
On a computer on the same network, open a web browser and on the
address line, enter the CLINiC system IP address that was assigned in
step 1 above. The Admin UI
Login
tab appears.
NOTE: The system IP address is displayed on the screen when you first boot up
the Vidyo CLINiC. After boot-up, when not in a call, the IP address is displayed
in the bottom right hand corner of the screen.
3.
In the
Login
tab, enter the admin login username (default is
admin
) and
password (default is
password
).
4.
Click
Login
. The rest of Admin UI tabs appear.
5.
Click the
Settings
tab to display all settings options.
Mandatory CLINiC Settings
The following settings are required for using the VidyoRoom SE software with the
CLINiC. These settings can be applied in the
Preferences
menu.
To apply the mandatory settings:
1.
In the Admin UI, click the
Settings
tab.
2.
If needed, click the blue triangle next to the word
Preferences
to view the
Preferences
menu.
3.
Make sure the options
Enable AEC
,
Enable Audio Processing
,
Preview Local
Content
and
Enable HDMI-CEC
are all unchecked. If any of these options are
checked, click in the corresponding box to uncheck them.
