Copyright 2021 Iron Bow Technologies
10
System Installation
The Vidyo CLINiC is designed to be mounted on a stable supporting structure that
prevents it from being knocked over or dropped. The standard VESA mounting hole
pattern on the back of the unit fits many commercially available wall mount brackets,
desk stands and mobile carts. Prior to installation, please refer to
Appendix A
for
mounting holes locations and dimensions. Please note, a Phillips #1 and #2 screwdriver
is required for system assembly.
Installing the Camera
Before using the system for the first time, you need to mount and connect the camera to
the mounting panel located on top of the Vidyo CLINiC.
To install the camera on the Vidyo CLINiC:
1.
Remove camera assembly from packaging and place carefully on a table top.
2.
The system is supplied with a camera mounting plate and countersunk bolt to
attach the camera to the mounting plate.
3.
Ensure the rear connectors of the camera are located at the rear of the mounting
plate, as shown below:
Figure 3 - Attaching Camera to Mounting Plate
Figure 4 - Attaching Mounting Plate to System Chassis
