26
Samm 6
Paigaldage parem tagahõlm (Pos.8) ja vasak tagahõlm (Pos.7), kasutage M12x80 polte
(Pos.42), M12 seibe (Pos.47) ja M12 Nyloc mutreid (Pos.50).
Kinnitage tagahõlma kummiterad (Pos.20) paremale ja vasakule tagahõlmale,
kasutage kummitera kinnitusplaati (Pos.19), M10x30 puidupolte (Pos.35), M10 seibe
(Pos.46) ja M10 Nyloc mutreid (Pos.49).
Lukustusriivide (Pos.26) paigalduseks kasutage M6x20 sisekuuskant polte (Pos.34),
M6 seibe (Pos.45) ja M6 Nyloc mutreid (Pos.48).
NB! Et tagade külgriivide korrektne paiknemine, keerake tagahõlmad nurga alla ja
lukustage hõlmad riiviga, seejärel pingutage poldid.
Step 6
Install rear right blade (Pos.8) and rear left blade (Pos.7), use M12x80 bolts (Pos.42),
M12 washers (Pos.47) and M12 Nyloc nuts (Pos.50).
Install rear rubber blades (Pos.20) to right- and left rear blade, use rubber blade
supports (Pos.19), M10x30 carriage bolts (Pos.35), M10 washers (Pos.46) and M10
Nyloc nuts (Pos.49).
To secure the locking latches (Pos.26) use M6x20 allan bolts (Pos.34), M6 washers
(Pos.45) and M6 Nyloc nuts (Pos.48).
NB! To ensure that blade locking holes align with latches, turn the rear blades to an
angle and then tighten the bolts.
26
34 45 48
20
19
35
46
49
26
34
45
48
8
7
47
50
47
42
26
45
48
45
34
Hole in blade
Locking latch
