17
13.
ADJUSTMENT AND WORKING WITH ARENA LEVELLER
•
Before you start working, adjust the working position of the leveller as parallel to the ground
as possible. To do so, hook up the leveller to ATV/UTV and then lower the leveller to
working position. Release the bolt on the tow beam and adjust the tow beam to suitable
position.
Adjustment point
•
Adjust the spring tine mounting tube as needed. Height of the tube depends on how deep you
want the tines to go into the ground in working position.
•
There is 5 adjustment points to side blade. Highest position can be used as a transportation
position when there is no need of the side blade.
•
Perimeter wheel is intended to work as a guide when working with arena edges and the wheel
has a chance to move against the arena wall. Wheel stops the rear blade to go against the
edges. NB! Before starting work, make sure the wheel position is correct for specific arena.
