HOW TO USE THE SOLDERPRO 150K
6
REFILLING LEC
Insert LEC into Torch
• Use only high-quality butane gas.
• Refill in a well-ventilated area away from any ignition
source and other people.
1. Hold butane canister upside down when filling (Fig. 1)
2. Firmly press canister nozzle into
Gas Filling Valve.
3. Observe fuel level and stop filling when 90% Full.
(Gas overflow during refilling is normal and does not
indicate a leak)
4. Wait for a few minutes before use.
1. Remove Chamber Cap at bottom of torch.
2. Insert LEC into chamber with gray flat side toward
inside of chamber.
3. Do not force LEC into chamber. Chamber Cap will
properly seat the LEC in chamber when screwed on.
4. Replace Chamber Cap.
Fig.1
Fig.2
Fig.2
(Liquid Energy Cell)
Butane
7
Summary of Contents for SolderPRO 150K
Page 1: ......
Page 11: ...www pro iroda com...
