• Unit uses flammable gas (Butane) under pressure – use with care.
• DO NOT expose to heat above +50°C (120°F) and avoid prolonged
exposure to the sun.
• DO NOT puncture or incinerate.
• DO NOT refill, ignite or use near open flame, heater, furnace or
combustible materials.
• Keep work area clean. Cluttered areas and benches invite injuries.
• KEEP AWAY FROM CHILDREN. Visitors should be kept away from
work area.
• Store in dry, locked cabinet out of reach of children.
• Be extremely careful as torch flame tip temperature is over 1300°C
(2400°F)
• Be extremely careful as torch flame is almost invisible in daylight or
under strong light.
• Use Safety Glasses.
• Do not touch the heated tip of the unit.
• DO NOT leave unit unattended when operating or hot.
• Always be sure unit is cool before storing.
• DO NOT replace cap without switching unit off and ensuring tip has
cooled.
• If your torch malfunctions do not try to repair. Contact your dealer
or online support for help.
• Butane-Propane mix or other fuel could create much higher
temperatures and cause flare-up at the tip exhaust slots.
2
3
IMPORTANT SAFETY
INSTRUCTIONS
Warnings:
Summary of Contents for SolderPRO 150K
Page 1: ......
Page 11: ...www pro iroda com...
