EN
Roomba Combo j7 Owner’s Guide
5
HAND WASHING
Thoroughly wash the pad with
warm water.
MACHINE WASHING
Wash using the warm cycle, then air
dry. Do not put in dryer. Do not wash
with delicates.
Care and Maintenance
Care and Maintenance Instructions
To keep your robot running at peak performance, perform the procedures on
the following pages.
There are additional instructional videos in the iRobot Home App. If you
notice the robot picking up less debris from your floor, empty the bin, clean
the filter and clean the brushes.
Cleaning the Mopping
Pad
Emptying the Bin
Part
Care Frequency
Replacement
Frequency*
Mopping Pad
Clean after a mopping
job
After 30 washes.
Bin
Wash bin as needed
Filter
Clean once a week
(twice a week if you have
a pet). Do not wash.
Every 2 months
Charging Contacts
Clean every 2 weeks
Full Bin Sensor
Clean every 2 weeks
Front Caster Wheel
Clean every 2 weeks
Every 12 months
Edge-Sweeping Brush
and Multi-Surface
Brushes
Clean once a month
(twice a month if you
have a pet)
Every 12 months
Sensor, Camera Window
and Pad Shelf
Clean once a month
Note:
iRobot manufactures various replacement parts and assemblies. If you think
you need a replacement part, please contact iRobot Customer Care for more
information.
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
Note:
You can clean your mopping
pads two ways: either by hand
washing, or in a washing machine.
1
2
3
Press bin release button to
remove bin.
Open bin door to empty bin.
Place bin back in the robot.