www.domotec.uk.com • www.irobot.com
21
1
Remove and empty
Roomba’s bin
2
Clean Roomba’s filter
compartment
3
Clean Roomba’s brushes
a.
Remove brush guard by pulling
both yellow tabs
Maintenance
To keep Roomba running at peak performance, it is recommended that you
perform the following maintenance tasks every three uses:
Press button and
pull to remove bin
Empty bin
B.
Remove brush caps and use scissors
to cut any hair wrapped around the
brush. Use the Roomba cleaning tool
to comb hair from brush.
C.
Remove and clean hair and dirt from
Roomba’s brush bearings. You MUST
refit bearings and brush caps before
reuse.
TIP: Bin emptying and brush cleaning should be done after every 3- cleaning
cycles depending on the amount of hair, dirt, and debris in your environment.
TIP: If you notice roomba picking up less debris from your floor, empty the bin
and clean the brushes.
Do not attempt to run roomba without the bearings. If you misplace
roomba’s brush bearings, contact Customer service for replacement
bearings.
excessive build up of hair in roomba’s brushes and bearings can
permanently damage roomba. Inspect brush bearings regularly.
a.
Clean or replace filter*
B.
Clean filter
compartment
Visit www.irobot.com/usetips for instructional photos
*Replace filter every 2 months
Brush
caps
Brush
bearings
Brushes
Brush
caps
