Ava 500 Remote User Guide
Version 1.2 – 01/23/15
Page 2
Reconnect the video conference.
Open the destination list. After you have arrived, tap again to see any pre-defined
positions in that space, designated by circled letters on the map.
The map interface, displayed after you check in and tap GO.
A destination, typically located by the door to an office or conference room.
Corresponds to the numbers on the destination list. Touch and hold a destination
or any place on the map until you get a green circle. The Ava 500 will drive there.
The Ava 500. Green=stopped. White=traveling.
Tap to stop the Ava 500 while it is travelling.
Open the destination list. Selecting a destination here ends your session and
teleports you to the new destination. Tap
GO
when the screen changes to
start a session at the new destination.
Open a track pad interface, where you can drive the Ava 500 manually and adjust
your view through the camera.
Open an Extend Session dialog.
End the session.
iPad
iPhone
Open the calendar interface.
