61. TROUBLESHOOTING
1. Check if the fuse cable is connected to the correct fuse.
2. Only use authentic fuse cable for IROAD device.
3. When using cigar jack to power up the device,
the device will be turned off when the engine is off.
4. Recommended by connecting fuse cable in order to access parking mode.
Device unable to power up due to cable issue
1. Power will be cut-off to safe guard the car battery when the voltage reaches
the pre-set voltage.
2. Battery discharging period might get shorten due to the battery condition /
the motion recordings recorded.
No power after parking. (LBP)
1. Recording can be playback using IROAD PC viewer
and IROAD App on smart phone.
2. 3rd party players may not fully support the recording video format.
3. If error occurs during recording, contact IROAD After-sale Service
for further enquiries.
Unable to view playback recording
1. Make sure the device is power off before inserting
the memory card into the device.
2. If the device prompts any error message regarding the memory card,
try reformatting the memory card and insert back to the device and test again.
3. User is required to insert the memory card into the memory card reader
before inserting into the PC.
4. Make sure to check whether the memory card reader is faulty
Device keep restarting due to memory card issue
1. Check if there is any dust or dirt on front and rear camera lenses.
2. If windscreen is tinted, it may affect video quality.
3. Surrounding light may affect the video quality
The quality of recorded video is not clear
Summary of Contents for N9F
Page 64: ......
