20. FIRMWARE UPDATE
Update
Disconnect the power cable.
Remove the memory card from the device and insert it into the card reader. Afterwards, insert the card reader into the PC.
Once it is done, copy the downloaded firmware file into the memory card under the folder named “Update”.
Insert the memory card back into the device.
Connect the power cable back into the device (DC-IN) port.
Turn on the engine. Make sure the engine is on.
The device will update and format by itself and the LED light will start to flicker.
It will then prompt a message “Re-installing the program, please do not turn off the power.”
Once the update is done, the device will reboot and starts recording.
1 .
2 .
3 .
4 .
5 .
6 .
7 .
Manual Update
Menu and function can be changed without prior notice by sudden firmware upgrade or product enhancement.
Summary of Contents for N9F
Page 64: ......
