IRO Dashcam A66, Product Manual

Page: 9 / 21

Installation Steps
Once the wiring is completed, you will
®
hear the IRO Dashcam emit a beep
and see a red light. This indicates
proper wiring.
Use the provided tape strips to hold the
wires in place. This will prevent the wires
from separating. Wrap the tape around
the wires to hold them together. Plug the power connector back into the
socket from which it was removed.
®
Align the IRO Dashcam to the mirror
base aligning the plastic hooks. Firmly press the camera into place making
sure all four of the plastic hooks are fastened.
®
The IRO Dashcam should fit snugly as if
it were the original shell. Insert the TF card.
A class 6 TF card is recommended.
Congratulations! Your installation is
complete. Please be sure to keep the
original shell which you removed.
This will allow you to move the camera
to another vehicle in the future and
put your original shell back in place.
08