Safety Warnings
22
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
CAUTION- INVISIBLE LASER RADIATION WHEN OPEN
AND INTER LOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
Regulatory Information
Federal Communications Commission (FCC)
The device hased and found to comply with limits for a Class B computing device according to the
specifications in FCC rules Part 15. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation
3. If your device needs repairs, you must arrange for the manufacturer to make them if you are to keep
the device’s FCC registration valid.
This equipment, like other electronic equipment, generates and uses radio frequency energy. If not
installed and used according to the instructions in this manual, this equiment may cause interference
with your radio and television reception.
If you think this equipment is causing interference with your radio or television reception, try turning
the equipment off and on. If the interference problems stop when the equipment is switched off, then
the equipment is probably causing the interference. You may be able to correct the problem by doing
one or more of the following:
• Adjust the position of the radio or TV antenna
• Move the device away from the radio or TV
If necessary, consult your dealer or an experienced radio or television technician. You may find this
booklet helpful: “How to ldentify and Resolve Radio and TV Interference Problems” (Stock No. 004-
000-00345-4), prepared by the FCC and available from the U.S. Government Printing Office,
Washington, DC 20402. See individual devices FCC ID and registration numbers.
