17
Trouble Shooting
Power can not be
turned on.
No playback during CD
playback mode or the
“No Disc” message is
displayed on the LCD.
No sound or pour
quality sound.
AC adopter does not
work.
●
Did you put the battery in the right polarity order?
(Are the batteries inserted correctly?)
●
Are the HOLD switches activated on the player or remote
controller? (If it is, please turn it off.)
●
Are the doors opened?
●
Are the batteries that is not fully exhausted?
●
There is a possibility that the surface of the CD is
scratched or contaminated, which results in read failure. In
this case, replace it with a new one.
●
Did you insert the CD in the correct side (printed side
should be upward)?
●
Lens can be dirty. Clean it with clean and soft rug.
●
Moisture condensing may have occurred. (Moisture is
gathered around the lens when IMP-100 is moved from a
cold site to a warm site.) Dry up the moisture in a warm
place for a couple of hours.
●
Check to see if the CD is inserted.
●
Is the volume set to “0”?
●
Is the earphone or the remote controll terminal properly
inserted? Or, is there any external object on the terminal?
(If any external object is attached on the terminal, noise
can be generated.)
●
This product is for 220V only. Check to see if the input
voltage is correct.
●
Check to see if the DC terminal is connected to the other to
the right input socket.
Check the followings first when any error is suspected.
