Timer button
Press the button to choose the desired run time.
To clear off the timer, press the button again.
Delayed start button
Press the button choose the desired delayed
start time. To clear off the delayed start timer,
press the button again.
Air flow strength button
Press the arrow buttons to select desired air
flow during operation.
Continuous mode offers 10 strength settings.
Natural breeze pattern mode offers 3 strength settings.
Focused oscillation mode operates at the highest strength setting.
Power button
Product will begin operating on
the last setting used. Press the button
during operation to turn the product off.
Remote control
To use the remote, please point the infrared
sensor at the remote receiver on the front
of the main body.
Oscillation buttons
Horizontal - Press the button to choose the left
and right oscillation.
Vertical - Press the button to turn the up and
down oscillation on or off.
Mode button
Press the Mode button to change the product mode.
Continuous - Product runs with a continuous air
flow at the chosen air flow strength.
Breeze - Replicates breeze patterns by changing
the strength of the air flow.
Focused oscillation - Product oscillates up then
down to 45 degrees, and then left and right
continuously within a 30 degree focused range.
Front
back
Delayed start button
and indicator light
Air flow strength buttons
and indicator light
Horizontal oscillation button
and indicator light
Vertical oscillation button and
indicator light
Mode indicator lights
Power button
Timer button and
indicator light
Mode button
Control Panel
Remote Control
Front guard
Main body
Vane
Control panel
Remote receiver
Base
Rear guard
Adapter
Power cord
Handle
Motor
PARTS
Changing Out The battery
Please replace the battery with a CR2025 battery when the
product takes a long time to respond or stops responding when
the operation buttons are pressed .
1. Pull out the battery holder.
Hold the claw in to close the gap and pull the holder out .
①
②
Claw
Hold and pull it out
Battery holder
Back
2. Insert a new battery.
Insert a new battery into the battery holder . Make sure
the battery is facing the correct direction . Insert the
battery holder back into the remote control .
•
Please pay attention to which side is front and which is
back .
•
Please
dispose of battery according to the disposal
recommendation on the battery packaging or proper
governmental regulations .
Up
(Positive side is up)
Improper handling of the battery can lead to battery rupture, leaking battery liquid, and damage
to the surroundings . Please read the ‘Remote use’ section of the safety precautions before use .
CAUTION
5
6
