IRIS ST5e, User Manual

Page: 44 / 47

43
If ST5e runs out of Memory
Memory of ST5e is shared between storage memory and program memory.Storage memory
is used to store the information created and programs installed. Program memory is used to
run programs in the ST5e. The ST5e automatically manages the allocation between storage
and program memories. However, in some situations, such as when memory is low, the ST5e
may not be able to automatically adjust the allocation. If user receives a message stating that
storage or program memory is unavailable, try the following solutions.
Storage Memory-Secure Digital (SD) Storage Card
1. Move data to a Secure Digital (SD) Storage Card.
2. Tap , Program and then Windows Explorer . A folder named “ Storage Card ” will
appear once the SD memory card is inserted.
3. This folder will disappear automatically once the card is taken out from the slot.
4. Move any file or data into the “ Storage Card ” folder for backup purposes.
5. Files or data save in the SD card can be opened in any other SD card reader or
computer.
6. Files copied from computer can also be opened in the device, as long
as it does not exceed the memory of the device.
Program memory
1. Stops inactive programs.
2. Clear storage memory as described in the preceding section.
3. Reset the device, as described in “ Reset the ST5e ”.
Screen is Blank
If the ST5e does not respond when user presses the Power button, press and hold the button
for a full second. If this does not work:
1. Make sure user’s battery cover is locked and all expansion slots are secured.
2. Plug the ST5e into AC power.
3. Change or recharge the main battery.
Screen is Dark
Prolonged exposure of the ST5e to direct sunlight may cause user’s ST5e screen to be
temporarily dim. This is a normal case for LCD screens and it is not permanent.