Black
IC-SLDCP6
EN
15
Install a revolving brush
①
Insert one side of the brush free gear into the belt
and the opposite rotation shaft.
②
Attach the belt to the gear.
③
Insert the rotating brush.
①
②
③
Hang up the belt
Install brush housing
①
Pull the gripper of the brush cover to the inside of
the front end of the suction head.
②
Press the brush cover and, using a coin, turn the
lock screw cover in the direction of the lock ( ).
①
②
Sponge filter
Every three months or so
Remove the dust bag unit
• Refer to "dirt removal methods" on page 12 to
remove the dust bag unit.
Remove the sponge filter
• Grasp and pull out the sponge filter in the dust
collecting bag.
Clean the sponge filter with water
• After cleaning, please wring and fully dry.
Install sponge filter
• Please install it into the storage section of the dust
bag and use a screwdriver to insert the whole
sponge filter into the storage section of the dust
bag to avoid leaving gaps.
Install the dust bag unit and close dust
bag cover
• Refer to "dirt removal method" on page 12. Install
the dust bag unit and forcefully close the outer
cover.
●
Install the sponge filter after fully drying it.
●
Be sure to install a sponge screen, to
help prevent failure.
