Black
IC-SLDCP6
EN
14
Cleaning and maintenance
Continued
Suction head
Dirt accumulation
• If there is any dirt accumulation in the rotating
brush and suction port, please use tweezers to
clean it.
• If there is dirt accumulation inside the suction head,
it will lead to reduced suction.
Please check regularly, and use tweezers
or disposable chopsticks to clean up dirt
accumulation.
Dust bag
When the dirt is obvious
• When the dust bag rack is dirty, clean it with water
and dry it thoroughly.
Washing with water
Revolving brush
When the dirt is obvious
Remove the brush cover
• Use coins, etc., to turn the lock screw cover of
the brush housing to unlock (
) and remove the
brush housing.
Outer covering of the Brush
Remove the revolving brush
①
Lift the belt side of the swivel brush and remove the
belt.
②
Pull the swivel brush to one side of the belt and
remove it from the rotating shaft on the opposite
side.
①
②
Pull down the belt
Rinse the revolving brush with water
※
If the rotating brush is wrapped with dirt, clean it
with scissors or tweezers before washing it with
water.
• After washing it with water, let it dry thoroughly.
