14
NOTE
TIP
The fuse can be tested by checking the continuity across both sides of fuse with
a multi-meter. If no continuity is measured, the fuse must be replaced.
An additional replacement fuse is included on the back of the Wiring Legend Guide.
CAUTION:
FUSE REPLACEMENT SHOULD BE PERFORMED WITHOUT POWER CONNECTED TO THE UNIT.
Fuse Specification
1
Fuse Replacement
Remove the screws to release the Wiring Legend Guide.
2
Use tweezers, and replace the Fuse.
Littlefuse
Manufacturer
0451 004. MRL
Part No.
4A
Ampere Rating
The iCAM7100 series camera unit(s) contains a replaceable fuse which protects the unit(s)
from excessive current consumption. In the event that the iCAM7100 series unit(s) will not
power on, a fuse replacement may be necessary.
How to Replace the Fuse
