9602-N User Guide Version A
Document Number: 451-92695-001A
21 of 40
6
C
ONFIGURATION
S
ETTINGS
The 9602-NAL allows the DTE to configure the data port communication parameters. The three
configuration types are active, factory default, and stored.
The
active
configuration is the set of parameters currently in use. They can be changed
by the DTE individually via specific AT commands.
The
factory-default
configuration is stored in permanent memory. This configuration
can be recalled at any time through use of the AT&Fn command.
Two groups of settings, or “profiles,” can be
stored
as user-defined configurations.
The DTE first creates desired active configurations and then writes them to memory using the
AT&Wn command. These profiles can be designated to be loaded as the active configuration
upon 9602-NAL power-up through use of the AT&Yn command. The 9602-NAL can be reset
without loss of power to these profiles through use of the ATZn.