Before Use:
1. Please read the instructions carefully before operation, and assemble the
massage chair correctly according to the step of manual instructions.
2. Please do check the power button has been switched off before connecting the
plug to a socket outlet.
Familiarising Process:
1.Do not use this chair for too long for the first time.
2.If too much pressure from the massage heads makes you uncomfortable, put a
piece of thick blanket on your back to reduce the pressure.
To Prolong The Life Span of the Machine:
The rated working time of this machine is 15 minutes. To prolong the life span of
the machine, stop for 20 minutes before the next use.
After use:
Switch off power and pull the plug out of the socket every time after use.
Storage and Working Conditions:
1. Do not expose it to sunlight directly.
2. Do not put it too close to a heater.
3. Do not use this machine in wet areas such as bathroom, swimming pool or spa.
4. This machine is not for outdoor use.
5. Do not use it where there is too much dust, oil, smoke or caustic gas.
Protection of the Massage Chair:
1.Do not put your hands between the massage heads while they are working.
2.Do not drop or push anything into any slot or hole of the machine.
3.In case of damage to the machine, do not jump on the back or the seat cushion.
Repair:
Do not try to assemble or disassemble the chair yourself if there is any damage
to the wire or the plug. In this case please contact the nearest outlet or service
center for maintenance or repair.
Cleaning:
Do not clean the massage chair with thinners such as ethanol or gasoline, but
wet towels are allowed to clean its surface.
Others:
1.If you need to move the massage chair between places with large tempera
ture
variance, please ensure that the machine has been stopped working for at least
one hour before moving.
2.Please switch the machine off and pull the plug out of the socket immediately
if you feel anything abnormal while it is working, then consult the local service
centre for maintenance or repair.
3.Please stop the machine and consult your doctor if you feel pain.
MAINTENANCE & PRECAUTIONS
18
17
TROUBLESHOOTING GUIDE
The machine does not
work when it is connect-
ed to power.
Its sound suddenly
while the machine
is working.
The machine
stops suddenly
It has not been switched
on.
Connection failure be-
tween the plug and the
socket.
The machine has been
working for too long.
It has been working conti-
nuously for so long that
it automatically stops for
self-protection.
Cut off power and pause
for half an hour.
PROBLEM
POSSIBLE CAUSE(S)
SOLUTION
The machine is in normal
working state if the noise
is slight.
Cut off power and pause
for half an hour.
Cut off power and pause
for half an hour.
NOTE: if you fail to solve the problem after making the above-mentioned
checks, please send the machine to our service center for maintenance.
Switch it on.
Check the socket and en-
sure the plug has been
closely connected to the
socket.
Some clattering noise
is heard while the ma-
chine is working.
There is nothing need
to be done.
It has been working conti-
nuously for a rated period
of time.
P O W E R
R AT E D W O R K I N G TI M E
S A F E T Y D E S I G N
V O LT AG E
F R E Q U E N C E
M A S S A G E C H A I R
1 8 0 W
1 5 M I N U T E S
D E S C R I P T I O N
M O D E L
S L - A 1 7
1 10 - 1 2 0 V ~
2 2 0 - 2 4 0 V ~
TECHNICAL SPECIFICATIONS
A P P E A R A N C E
T T
T
6 0 H z
5 0 H z / 6 0 H z
C l a s s
I
