iRest A389-2, Operation Instructions Manual

Page: 7 / 10

11
10
Method of usage Method of usage
3.Turn off power, stop massage
3) Cut off the power of the whole machine.
Figure (Switch power off)
1) Press power button during massage progress, all massage function will be stop
immediately, the backrest and footrest will return to original position automatically,
meanwhile you can set up memory function. After rated working time, all
massage functions will be finished, meanwhile you can set up memory function,
but backrest and footrest won't return to original position.
2) Memory store function: After rated working time or switch off, the hand controller
displays "Memory" and glitter, remind the users whether need to store the
massage mode before turn off, you can press the memory function buttons "M1"
or"M2" as you like, store the massage mode.
FUSE: T5AL 250V
POWER INPUT
CONTROLLER JACK
· Arm rest fast button
USB
Function Button
Description
On/off
Linkage
move up
Zero
gravity
Linkage
move down
Auto
modes
Press this button switch on or off the chair
Press and hold this button to slowly lift the backrest and
lower the leg rest. Release the button to stop
Press one time, switch one auto lay down mode, total 3
modes circulation
Press and hold this button to slowly lower the backrest and
lift the leg rest. Release the button to stop
Press one time, switch one auto massage functionUSB
USB charger. Can charge your smart device (cell phone)
Diagram of the power switch position
Unplug the power cord
4. Installing the Arm Rests
Figure 1 Figure 2
Figure 3 Figure 4
Put in the bottom
of the seat frame
Figure 5 Figure 6
·
Find out the coupler plug from the seat frame base respond to the arm rest, go
through out the end mid of the seat frame (Figure 1).
·
After you finish the step 1, connect each plug according to the remarks on the
wire. (Figure 2).
·
Insert the plug well which go out from the seat frame base, as well as the air
hose. (Figure 3)
·
After you insert the plug well, put the wires in to the seat frame base along with
the metal tube, then put on the cloth cover, avoid to the air hose folded. (Figure
4)
·
Two hands hold the two ends , put the back end of armrest to bottom of the lower
end of capsule , then screw it(Figure 5) .
·
Then Buckle up the shoulder decoration strip(Figure 6).