BLANKOM HDE-4K5 User Manual
Version 1.0 – 12-2018
Page - 36 -
techn. data are subject to change w/o notice!
Regarding Latency:
Depends on used Chipset. Please do not expect a realtime encoding from this devices. The range is from 200ms up
to 2 seconds (worst case).
Here is an example page used with an encoder and a media server by RTMP:
The Latency is of course depending from the encoder settings profile and the related values like:
-
Bitrate, Profile: VBR/CBR , Codec, Frame rates, … BTW: Upscaling is consuming more CPU power
And Stream capacity and Picture Improvement settings.
-
Downscaling settings (Same as Input … down to 176x144 size)
-
And finally the OSD Insertion actions (if you enable this).
All these values have an impact on processing load and therefore the latency.