HDC-5016-HDC-5064 IP to QAM Modulator User Manual
Date 8. Dezember 2022 *) depend on model types
BLANKOM-HDC-5016-32_IP2QAM-modulator-V1.6-RR-12-2022.docx
13
Program Modification:
The multiplexed program information can be modified
by selecting the program in the ‘output’ area
.
For example, when clicking on a service, it opens a popup as dialog box (Figure 6) where you can
change or insert new data or even rename the service.
⚫
General
From the menu-bar on the upper side of the web-frame, selecting “General”, displays the interface
where you can set parameters for each selected output channel (TS1…TSn).
NOTE:
(Model release dependent) Please do not use the DATA-RJ45 Port at the front, it is only a
spare port for the IP-streams but the rear-ports are the ones to be preferred.