HDC-5016-HDC-5064 IP to QAM Modulator User Manual
Date 8. Dezember 2022 *) depend on model types
BLANKOM-HDC-5016-32_IP2QAM-modulator-V1.6-RR-12-2022.docx
12
And you are done
–
but your Device need a connection to these NTP addresses. -> Local Gateway settings
should fit as well to asure the connection to external NTP servers.
4.2.2 Parameters
“TS Config”
- Menu
⚫
Stream Select Basics
From the menu on up side of the webpage, clicking “Stream Select”, it displays the interface
where users can choose the programs to Mux out:
Configure ‘Input Area’ and ‘Output Area’ with buttons in ‘Operation Area’. Instructions are as below:
：
Enable/disable the CA Filter function. Clicking this box, you can filter out the input CA-PIDs to
avoid disturbing with the device scrambling function.
: To enable/disable the PID remapping (disabled recommended for pass through)
To refresh the input program information
To refresh the output program information
Select one input program first and click this button to transfer the selected program to the right
box to be processed to the output.
Similarly, you can remove TV Services from the multiplex in the right box.
To select all the input programs
To select all the output programs
To parse programs
time limitation of parsing input programs from TS
This
PARSING
is almost important to read the content from the input streams
….
Operation Area
Output Area
Input Area