www.blankom.de - 5 - [email protected]
All technical data are subject to change w/o any notification
*) HDMI compatible Interfaces
BLANKOM EMU 8600 EN 2022 V1.1
EMU 8600
CONNECTING
REAR
Ground: Please always ground it to avoid EMV and electrostatic discharges between different devices.
Between the ON/OFF Switch and the IEC-Male-connector is a Fuse, so if the unit is not starting after
switching it to ON and IEC-Power source has been connected properly, check the Fuse and if defect, replace
with a similar one.
Front:
LEDs indicating the operation of the max. 3 modules inside. NMS is for accessing the 3 web-Interfaces of the 3
modules:
The default IP addresses of these 3 Modules at the NMS-port are: 10.0.0.101 10.0.0.102 10.0.0.103
If you ever lose the IP address somehow, we can send to you this detection tool:
Upon request only.
