IREM 7070404024493, Installation And Operation Manual, Page: 24 / 73

MAN02774E/1
24
An example
setting the lamp parameters (from 3000W down to 2755W)
From lamp parameter display menu press
oK to enter the editing mode (the dash starts
to flash: enter mode is ON).
press the left arrow to decrease the “thou-
sands” field down to the desired value
Confirm by pressing enter. The flashing dash
moves to right.
To increase the value currently active press
the right arrow
When pressing enter, the flashing dash will
immediately move to the next field to be
modified.
When the last field (the unit one) has been
entered, press enter to confirm the value.
The asterisk is off: the editing mode is over.
Remark
Follow the above steps to enter the parameters related to:
- lamp max. power
- lamp max. current
- lamp min. current
- lamp stand-by current
- current set-point
- password
Directions for data entering
Directions for use