10
Turning On the Device
1. Press and hold the ON+ button [5]* for two (2) seconds
to turn on the device.
2. The most recently selected treatment time and pro-
gram will flash when the unit is turned on.
▲
NOTE: Do not turn the device on until Back Wrap is
properly attached.
Turning Off the Device
1. The device turns off automatically after the therapy
session time has elapsed.
2. To turn the unit off manually, press the OFF- button
[6]* for three (3) seconds. The display will be blank and
the device will turn off.
In an emergency, you may also pull the connector(s)
from the device and then remove the belt.
▲
NOTE: To prevent unpleasant electric shocks, never
remove the device while it is still turned on.
Selecting the Treatment Program Mode
The iReliev stimulator device (Model # ET-9090/ET-1313/ET-7070) offers eight preset
treatment program modes. The programs differ with respect to varying pulse
widths and frequencies. The user may choose suitable stimulation mode depend-
ing on their personal condition as indicated in the following steps:
1. Start from P1: only change each mode after a couple of seconds after sensing
the stimulation of that mode.
2. Choose the suitable mode in which you feel most comfortable. Set the device
on that mode.
3. In the case you don’t feel certain about the appropriate mode, repeat steps 1 & 2.
Selecting the Therapy Intensity Level
1. Intensity is adjustable according to the channel selected. Select the channel you
wish to adjust by pressing CH1 or CH2. “CH1” or “CH2” will flash on the display.
2. To increase or decrease intensity, press ON + (to increase) or OFF – (to decrease)
repeatedly until the desired intensity level flashes on the display.
▲
NOTE: You will feel the intensity increase or decrease as you select the intensity
level.
