www.iReliev.com
11
Pod Channel Pairing Continued
Note:
If the receiver pod(s) did not pair successfully, the button on the receiver pod(s)
will not blink. The LCD on the remote will display FF.
STEP 4 -
To exit pairing screen, press the OFF/- button to return to the standby screen.
Note:
Your receiver pod(s) will now be programmed to the channel you selected.
Repeat the process with additional pod(s) if desired.
ADJUST YOUR THERAPY SETTINGS ON REMOTE AS FOLLOWS:
STEP 1 -
Turn ON respective pod(s).
STEP 2 -
Press CH on remote to navigate to the new channel select CH1, CH2, CH3, or
CH4. Respective channel will be displayed in the upper right corner of the LCD screen.
STEP 3 -
Press SET on remote to adjust mode, program, and intensity level by channel
pod(s). See steps 6-9 on pages 14-15 to complete the set-up.
Note:
If you have programmed your pod(s) to a different channel other than CH1, use
the adhesive labels provided to mark the pod's channel on the pod(s).
Summary of Contents for ET-5555
Page 1: ...Expandable Wireless Pods Instruction Manual Model ET 5555...
Page 34: ...www iReliev com 34...
Page 35: ...www iReliev com 35...
