Antennas Menu
In most cases, leave these settings at their
default setting. Ghost will decide which antenna
to use for both Tx and Rx.
For ‘special cases’, such as using directional
antennas for extreme range, manually set the
desired antenna.
Tx Power Menu
Auto power mode will decide which power level
to use for the uplink transmission based on the
signal strength received at the receiver.
Note that in PureRace, a unidirectional mode, Tx
power in Auto mode defaults to 100mW (or the
max. allowed by the selected region)
Failsafe Menu
Used only when a Rx is set in PWM mode. Set
the servo positions to be used in the event of a
failsafe.
Note that for serial protocols (SBus, GHST,
SRXL-2) failsafe is indicated by missing packets,
as preferred by FC firmware authors.
ImmersionRC Limited, Kwai Chung, NT, Hong Kong, www.immersionrc.com
Summary of Contents for Ghost Atto Duo
Page 1: ...Rev 1 4 Oct 2020...
