Antenna Placement
The Ghost receiver is incredibly sensitive, and works best when distanced from the typically high
power video transmitter antenna of long range drones.
Try to space the two antennas as much as possible if maximum range is required, as should be
common practice for any FPV control system.
U.FL Connector Care
The Ghost Atto receivers use U.FL connectors. These tiny high-frequency connectors require a bit of
care when removing and inserting.
When removing, try to pull vertically, with a finger-nail each side. Pulling to the side can damage the
antenna-side of the connector.
When inserting, make sure that the connector is lined up correctly before putting any pressure on the
connector. If it is lined up, it will easily click into place.
The supplied heat-shrink should be applied after connecting the antenna, and will keep the U.FL in
place, preventing any surprises in-flight.
ImmersionRC Limited, Kwai Chung, NT, Hong Kong, www.immersionrc.com
Summary of Contents for Ghost Atto Duo
Page 1: ...Rev 1 4 Oct 2020...
