IRAN KHODRO ARISUN, Owner'S Manual, Page: 49 / 89

48
3
Powering on engine
1- Position D: Starting – Immediately
release the switch after engine powers
on. In this mode, you shall not pull the
accelerator pedal.
When the engine powers on, the following
warning lamps will go out.
- Engine oil low pressure warning lamp.
- Cooling system liquid overheating.
- Battery charging.
- Diagnostic instrument.
- Emergency STOP.
- Engine oil low level warning lamp (f the
parking brake lever is released) or parking
brake involvement.
Caution
-When the vehicle is at driving mode,
avoid powering off the vehicle or
taking put the switch, because the
steering wheel will lock in this mode
and its steering will be impossible.
-Seriously avoid starting the vehicle
engine and keeping it powered on for
long times in roofed areas.
ATTENTION
Pull down the clutch pedal to the limit
in order to ease in powering on the
engine in temperatures below zero.
POWERING ON ENGINE
Useful suggestions
Powering on engine: Never power on your
vehicle engine in closed areas, because
the smoke of exhaust has deadly gas of
carbon monoxide. Before starting, adjust
the gear shift lever in neutral (N) mode
and raise the parking brake lever. Turn
the switch, and pay attention that surely
both lamps of engine oil warning lamp
and battery charging lamp are turned on,
then take action to start the engine, and
after powering on the engine, it is better
to move the vehicle in gear 1 mode, and
make use of heavy vehicle for a few time.
TIP
In case your vehicle is locked making
use of remote switch, and you take
action to unlock the vehicle by means
of mechanical switch, the alarm
system activates in this mode, which
will result in activation of alarm.*
*If installed on your vehicle