IRAN KHODRO ARISUN, Owner'S Manual, Page: 34 / 89

33
2
SAFETY BELTS
Safety TIPS about safety belts
Your vehicle’s safety belts are designed for sized of matured persons and only for using one person. Always ensure fastening the safety
belts of all passengers and pay attention to the following warnings:
- Never allow the passengers to adjust their seat backrest in a way that it is highly inclined. Safety belts have their complete function
providing that backrest inclination angle is 25 degrees in comparison to vertical line.
- Adjust your safety belts in a way that they are not loosen. During driving, never try to drag the safety belt from your body. In order for
appropriate performance, the safety belts shall always be in complete contact with your body.
- Lower belt of the safety belt shall not pass through your stomach, its appropriate place of passing is from the pelvis part. The belt shall
pass through shoulder and chest diagonally without burdening load to the neck.
- Pick out hard, sharp, or fragile objects line pencil, key, glasses and the like from your clothes before fastening seat belt. Take care that
the belts are not twisted and there is no barrier in their way.
- Replace the belts which lost their function and sensitivity in hard collisions or worn out ones.
- Make use of safety belts to fix the object on the seats, if possible. In collisions, throwing of not fixed objects on the seats in vehicle cabin
may result in serious injuries.
- In most of the countries, all passengers of vehicle are obliged to fasten their safety belts, except for situations where a person is
excluded from this action due to having medical certificate.
- Pregnant women shall pass their safety belt diagonally through shoulder, breasts, and one side of embryo. In case of having any doubt,
consult with your physician.
- New design safety belts are equipped with pre-tensioner system in order to control the amount of power burdened on passenger’s
chest in possible collisions.*
*If installed on your vehicle