Series HAB
Page 17
LT169 Aug 10, 2021
Installation Instructions
-
Angle Mounting Configurations:
The mounting kits have provision for
0°, 15° and 30° mounting angles
using the optional mounting
brackets. Figure below shows the possible angle configurations to install at desired angle.
Note:
Other clearances must be maintained as per clearance to combustibles table.
Ceiling Mount / Hanging Configuration
Use these bolt
holes when
mounting heater
from ceiling
at any angle
0°
15°
30°
15°
30°
Right side
of bracket
Left side
of bracket
Use these bolt
holes when
mounting from wall
at any angle.
0°
15°
30°
Right side
of heater
Left side
of heater
0°
15°
30°
Wall Mount / Hanging Configuration
Unistrut is fixed
to
heater
using
1
2
" X 1" Bolts (Qty 8)
(supplied with heater)
Unistrut is fixed
to
wall bracket
using
1
2
" X 1" Bolts (Qty 8)
(supplied with heater)
Note:
Other clearances must be maintained as per clearance to combustibles table.
