RT-230-05
Bonding procedure
•
Place the router and the coordinator in distance ~1 m between each other.
•
Set the coordinator in bonding mode using the
bondNewNode(x)
function (see IQRF OS Reference Guide) and
plug the router to mains.
•
If everything is O.K. the coordinator assigns an address and network identification number to the router which
means that the router is bonded.
Configuration
The router can be configured using the IQRF Router Configurator. This tool consists of two parts:
•
PC program. It can be installed by simple unpacking the
Router-Configurator.zip
file in desired folder.
•
Program
ROUTER-CFG.hex
for the TR-52Bx module inserted in the CK-USB-04 kit connected with PC via USB. It
is a part of the ZIP above and should be uploaded into the TR module in a standard way using the IQRF IDE
development environment.
Caution:
No other program communicating with any IQRF device via USB (e.g. IQRF IDE) is allowed to run during
the upgrade procedure.
© 2013 MICRORISC s.r.o.
www.iqrf.org
MNRT23005_130220
Page 4