34
Quickly press the Button
5 times (within 2 seconds).
When the cleaning process ends,
the Status LED automatically goes
off, and vibration occurs 2 times.
The Status LED blinks in orange,
for 90 seconds, and the cleaning
process proceeds automatically.
Cleaning with heat
* We recommend cleaning the device after using 20 sticks for optimum performance of the device.
* Do not clean the device during heating or right after the use of the device. Let the device to cool down,
otherwise the Cleaning Wiper or the Cleaning Brush can melt and stick to the device.
* Take care not to let the Cleaning Wiper or the Cleaning Brush come into contact with any liquid, oils, solvents, etc.
* Take care not to let the Cleaning Wiper or the Cleaning Brush come into contact with eyes.
* Keep the Cleaning Wiper or the Cleaning Brush away from fire.
* Caution should be exercised when using the Cleaning Wiper and Cleaning Brush as they can be sharp.
* Use of other cleaning tools aside from Cleaning Wiper or Cleaning Brush or using excessive force may damage the heater.
Remove the Cap from the
device.
Insert the Cleaning Brush into
the device and clean the device
by spinning the Cleaning Brush.
Insert the Cleaning Wiper into
the device and clean the device
by spinning the Cleaning Wiper.
* Cleaning with heat means heating the remnants stuck to the heater. The heater can get very hot, so
do not let anything come into contact with the heater during or immediately after cleaning with heat.
Summary of Contents for lil SOLID 2.0
Page 1: ...Gu a de Usuario User Guide...
