WEARING A HEART RATE (HR) BELT
1
Snap the sensor firmly into the strap connectors
2
Adjust the belt length as needed
3
The strap is placed on the chest just under the breast line in direct
contact with your bare skin.
4
Moisten the belt electrode areas (rubber sections on the reverse side)
with water or electrode gel
5
Put the belt on so that it fits snugly and the iQniter logo is facing up in
the center of the chest
6
To use your iQniter Smart Sensor with iQniter Cardio Training in the
studio ensure that it is properly registered on my.iqniter.com
7
To use with watch or app you need to pair your iQniter Smart Sensor
with the device.
GETTING STARTED
Register your iQniter Smart Sensor on
my.iqniter.com. Then follow a few
simple steps, and you will be ready to use your iQniter Smart Sensor.
The HR belt turns on
automatically when a
heartbeat is detected.
www.iQniter.com
Register your belt on
my.iQniter.com
