TROUBLESHOOTING
CHECK YOUR BELT
■
Electrodes must be moist and in proper contact with skin. Unstable HR signals
may be due to dry skin contact with belt. In some cases it may be necessary to
move the strap a bit to get connected.
■
Ill-fitting strap, too lose against skin and electrode loses contact with skin
■
Strap not over heart, ensure sensor is in center of chest and electrodes in
contact with skin directly under breast line
■
Strap can provide years of use if properly cared for, however it will wear and
need replacing
■
Low battery (life is approximately 200 hours with normal use)
■
Damaged Sensor contacts (with care remove one contact at a time, don’t push
the sensor/transmitter from the belt)
■
The elastic strap has a max strench of 15 %. Different strap sizes are available.
TROUBLESHOOTING IN THE GYM
For troubleshooting when you use the iQniter Smart Sensor together with iQniter
Cardio Training in the gym, please follow this additional guide line:
1
Check that the sensor ID is correctly registered at my.iqniter.com or in the
AdmiQ-registrationprogram at the gym.
2
Cardio Training related troubleshooting (consult the instructor or reception in
the gym. Refer to installation guide at www.iqniter.com.)
Please note that iQniter Cardio Training only works with “
Q
” Smart Sensors
(white front). Suunto Smart Sensors (black front) are not applicable.
