5
6 Mounting Options
The Alliance-mx camera is designed to be used in one of the following
configurations.
1. Surface mounted to a plenum or other durable ceiling surface.
2. Surface mounted to any interior / exterior durable wall surface.
3. Mounted to the optional interior / exterior wall mount adapter.
NOTE: This guide covers installation of an Alliance-mx dome camera without the optional wall mount
adapter. For guidance on mounting the Alliance-mx to the wall mount adapter, consult the wall mount
adapter manual.
WARNING
:
When installing the Alliance-mx dome camera outdoors, the camera should not
be mounted directly to a wall surface. When mounting outdoors to a wall surface, the IQM-
WM2 (Alliance Wall Mount) is required (Figure 6.1).
Alliance-mx cameras provide the following connection options shown in
(Figure 6.2).
1. Ethernet (Power-over-Ethernet) connector.
2. Audio in/out connector (Requires optional audio cable with 3.5 mm audio
connectors).
Ethernet (Power-over-Ethernet) Connector
Audio In/Out Connector
Figure 6.2
Figure 6.1
