4.4.10 Language Setting
The Language Menu allows to change the IQAir system’s display language. The
languages from which you can choose will depend on the model and the
country of purchase.
1.
To reach the Language Menu from the main display window, press the
Menu
key nine times. The current language is displayed.
2.
To change the display language, press and hold the
Enter
key until the cursor
starts to flash.
3.
Use the
p
key to scroll through the display language options.
4.
Press the
Enter
key to save the desired display language and to exit the enter
mode.
19
Chapter 4
– Using the Control Panel
4.4.11 Current Model Setting
The Current Model Menu allows to switch the model setting from HealthPro to
HealthPro Plus for added gas and odor filtration (purchasing and installing a
V5-Cell Filter is required). Upon the installation of a V5-Cell Filter, changing the
Current Model setting to HealthPro Plus activates the Filter Life Monitor for the
V5-Cell filter (filter 2) on the control panel. This will ensure that the filter life of this
new filter will also be properly monitored.
Note:
If you already own a HealthPro
Plus you do not need to modify this menu.
1.
Press the Menu key ten times to reach the Current Model Menu.
2.
Press and hold down the
Enter
key until the cursor appears.
3.
Press the
p
key to change the model from HealthPro to HealthPro Plus.
4.
Press the
Enter
key to save the HealthPro Plus selection.
5.
Now the control panel also tracks the filter life of the V5-Cell filter. This will be
apparent by the green LED lighting up on the air cleaner illustration on the
control panel.
4.4.9 Changing the Airflow Units
1.
You can reach the Airflow Units Menu by pressing the
Menu
key eight times.
2.
You can change the airflow units which are displayed from cubic feet per
minute (cfm) to cubic meters per hour (m
3
/h), and vice versa, by pressing the
Enter
key for three seconds either when the system is switched on or in
standby mode.
3.
When the first character of the airflow units starts to flash, press the
p
key
once to change the units.
4.
Press the
Enter
key to confirm the airflow unit change. Until modified again,
the airflow rate will now be displayed in the newly selected units.
Note:
The air delivery (airflow units) displayed in this manual are examples
only and will vary according to model.
