24
Chapter 8
– Anti-Tampering Kit Instructions
4) Reinsert the face plate
and press it in completely.
5) Insert the flat-head
screwdriver into the small
opening on the side of the
display control panel.
4
5
6) Lift out the control panel
carefully. Do not lift more
than 2-3 inches.
7) Disconnect the red
connector of the ribbon
cable from the control
panel.
8) Insert two of the larger
types of screws through the
two holes and tighten,
using the supplied tool.
7
8
6
9) Plug the red connector
of the ribbon cable back
into the control panel.
Ensure that it is pushed in
all the way.
10) Reinsert the control
panel and press it in com-
pletely.
11) When you reconnect
the air cleaner to a wall
plug, the control panel
should again display
information. If not, you
have not reconnected the
control panel properly.
Recheck steps 5-10.
10
11
9
Now the other side.
Now you have secured the air cleaner, in order that it may not be opened by an unauthorized person. For filter
replacement you will need to remove the four arm locking screws. (Refer to diagram 3 and 8).
