4.4.10 Language Setting
The Language Menu Display allows to change the IQAir® system’s display
language. The languages from which you can choose will depend on the model
and the country of purchase.
1.
To reach the Language Menu Display from the main display window, press
the
Menu
key eight times. The current display language is displayed.
2.
To change the display language, press and hold the
Enter
key until the
cursor starts to flash.
3.
Use the
key to scroll through the display language options.
4.
Press the
Enter
key to save the desired display language and to exit the enter
mode.
17
Chapter 4
– Using the Control Panel
16
Chapter 4
– Using the Control Panel
4.4.8 Filter Life Reset
The Filter Life Reset function allows the Filter Life Monitor to be reset after a new
filter has been inserted. As a result, the appropriate filter life LED on the control
panel will be reset to green and the hour count in the Filter Life Reset display will
be reset to the full life span of the new filter.
Note:
Resetting the Filter Life
Monitor will also cancel the “Replace Filter” warning from the main display
window.
1.
To reach the Filter Life Reset function from the main display window, press the
Menu
key seven times.
2.
Press and hold the
Enter
key until the flashing cursor appears. The flashing
filter refers to the filter and its position within the system.
3.
Press the
key to select filter that has been replaced.
4.
Press the
Enter
key to confirm that the selected filter has been replaced.
5.
To safeguard against inadvertently resetting the life of the wrong filter, the
selection needs to be reconfirmed. To reconfirm the filter change and exit the
Filter Life Reset display window, press the
Enter
key.
Note:
If the wrong filter
has been selected, or if you wish to exit the enter mode, press the
Menu
key.
This leaves the Filter Life Reset unaffec ted.
6.
Upon successful reset of the filter life, the new remaining filter life (taking the
currently selected fan speed into account) will be displayed.
4.4.9 Changing the Airflow Units
1.
You can change the air volume units which are displayed from cubic feet per
minute (cfm) to cubic meters per hour (m
3
/h), or vice versa, by pressing the
Enter
key for three seconds either when the unit is switched on or in
standby mode.
2.
When the first character of the airflow units starts to flash, press the
key
once to change the units.
3.
Press the
Enter
key to confirm the air volume unit change. Until modified
again, the airflow rate will now be displayed in the newly selected units. N.B.
The air delivery (airflow units) displayed in this manual are examples only
and will vary according to model.
4.4.7 Time & Day Setting
In order to use the timer function, the current day and time must be set. Once the
current day and time are set, they will only need to be reset if the unit is
disconnected from the power supply for more than an hour.
1.
To access the Time & Day function from the main display window, press the
Menu
key six times.
2.
Press and hold the
Enter
key until the cursor starts to flash.
3.
Select the hour by pressing the
key.
4.
Press the
Enter
key to save the hour setting and to proceed to the minute
setting.
5.
Select the minutes by pressing the
key.
6.
Press the
Enter
key to save the minute setting and to proceed to the day
setting.
7.
Select the day of the week by pressing the
key.
8.
Press the
Enter
key to save the day setting and to exit the enter mode.
9.
Press the
Power
key to return to the main display.
Note:
The display will
automatically return to the main window if no key is pressed for 15 seconds.
