IQ PBX600, User Manual

Page: 57 / 134

www.yeastar.com Page 57
IQ PBX 600 User Manual
For more information, please refer to
Appendix G How to Use DID.
·Extension
Define the extension for DID number. This field is only valid when you use BRI,
SIP, SPS or SPX trunk for this inbound route. You can only input number and
‘-‘in this field, and the format can be xxx or xxx-xxx. The count of the number
must be only one, or equal the count of the DID number.
·Caller ID Number
Define the Caller ID Number to be matched on incoming calls. Leave this field
blank to match any or no DID info.
You can also use a pattern match (e.g. 2[345]X) to match a range of numbers.
The following patterns may be used:
X : Any Digit from 0-9
Z : Any Digit from 1-9
N : Any Digit from 2-9
[12345-9] : Any digit in the brackets (in this example, 1,2,3,4,5,6,7,8,9)
The ‘ . ’ Character will match any remaining digits. For example, 9011. will match
any phone number that starts with 9011, excluding 9011 itself.
The ‘
! ’ will match none remaining digits, and causes the matching process to
complete as soon as it can be determined that no other matches are possible.
Example 1:
NXXXXXX will match any 7 digits phone number.
Example 2: 1NXXNXXXXX will match a phone number starting with a 1,
followed by a 3-digit area code, and then 6 digit number.
·Distinctive Ringtone
IQPBX600 support mapping to custom ring tone files. For example, if you
configure the distinctive ringing for custom ring tone to ‘
Family ’, the ring tone
will be played if the phone receives the incoming call.
·Enable Callback
You can enable the callback function of this inbound route. If you want to
configure the callback function, please refer to
chapter
3.5.12
How do I configure distinctive ring tones? Please refer to
APPENDIX E .
Currently distinctive ringtone can be compatible with Yealink and Snom phone.
2)
Member Trunks
This area allows you to select which trunks will be member trunks for this route.
To make a trunk a member of this route, please move it to the 'Selected' box.