16
9. Expanding the iQ CLiQ into a 2-Dog System
1. To turn the iQ CLiQ into a 2-dog system, start with the handheld
transmitter with the stimulation set to level 0. Hold down buttons
1 and 2 simultaneously for 5 seconds. You should now see that the
LED indicator is blinking rapidly.
2. With the receiver/collar turned off, take the handheld transmitter and
hold the two red on/off dots together for 5 seconds. The LED indicator
should now be blinking rapidly.
3. While both the handheld transmitter and receiver/collar LED
indicators are rapidly blinking, press button 2 to code that button to
the receiver/collar you desire. The LED Indicators on both the
handheld transmitter and receiver/collar will blink rapidly for 15
seconds or until they have been coded together.
4. When the iQ CLiQ has been coded with an additional receiver/collar,
EXWWRQZLOOIXQFWLRQDVWKH1LFNDQG3XOVDWLQJ1LFNVWLPXODWLRQRQ
WKH¿UVWUHFHLYHUFROODU%XWWRQZLOOIXQFWLRQDVWKH1LFNDQG
3XOVDWLQJ1LFNVWLPXODWLRQRQWKHQHZO\FRGHGVHFRQGUHFHLYHUFROODU
5. To go back to a 1-dog system, repeat steps 1 and 2. While both the
handheld transmitter and receiver/collar LED indicators are rapidly
blinking, press button 1 on the handheld transmitter.
6. When done correctly, both buttons 1 and 2 will now only operate
the one receiver/collar you have coded. To check that the handheld
transmitter is coded to the receiver/collar, press a button on the
handheld transmitter, and the corresponding receiver/collar LED
indicator will blink.
Summary of Contents for iQ Cliq
Page 1: ...2 Owner s Manual ...
