Gateway
Quick Start Guide
1.
Setup
1.1.
Connecting Ethernet cable
For network communication, use a patch cable to connect the gateway to 10/100Mbps capable
Ethernet switch or router. Connect the gateway to the same local network with your computer.
CAUTION!
This guide is assumes that you can connect the gateway to the same local network with your
computer!
1.2.
Power on
The gateway works with 9V-16V DC power supply. The device has no power switch. It can be
turned on by connecting the power source to it. After the gateway successfully powered on and get
a DHCP address the ACT status LED started blinking and the system gateway service is running.
2.
Gateway configuration
The configuration of the gateway is possible via the Link It! management tool.
With Link It! Management tool the user is able to configure:
● MQTT Network settings
● MQTT topic subscriptions
● Scheduler settings
● Enable or disable implemented services
2.1.
Download Link It!
To setup and manage the gateways remotely at first you have to download the IQ Home LinkIt!
application from the IQ Home website according version to your operating system:
https://www.iqhome.org/downloads#link-it!
Extract the downloaded package and run the application from the extracted folder:
● Linux: iqhome-linkit
● Windows: IQHome LinkIt.exe
©2018 IQHome Kft
3 / 15
