LEDs & Buttons
This system has 2 buttons and 7 LEDs.
One.
Ready LED
Ready LED shows the status of NAS Services.
On - All NAS services are available.
Slow blinking - Booting or shutting down.(All NAS services are unavailable.)
Fast blinking - Running factory default.
Off - Booting or HDD Power Save Mode.
Gigabit LED
Gigabit LED shows the gigabit ability of LAN Port Link
On - The link of LAN port is Gigabit Speed.
Off - The link of LAN port is not Gigabit Speed.
HDD LED
HDD LED shows the status of internal HDD.
On - NAS recognized the internal HDD.
Blinking - Internal HDD is being accessed.
Off - NAS can't recognized the internal HDD or HDD Power Save Mode.
USB LED
USB LED shows the status of USB MEMORY port.
On - USB storage device is connected and ready to use.
Fast blinking
- Wait USB Copy event for 10 seconds.
- To run USB Copy, push the button.
Slow blinking - Now USB copy action is running.
Off - No USB device is connected.
LAN LED
LAN LED shows the link status of LAN port.
On - The link of LAN port is on.
Off - The link of LAN port is off.
Power button
It is for system power on/off.
Power LED
It show the status of NAS power.
On - Power On.
Off - Power Off.
Reset/USB Copy button
To make system with factory default configuration,
1. Keep this button pushed for more than 5 seconds.
2. Ready LED shows fast blinking.
3. After factory default is done, NAS will be restarted.
To run USB Copy operation,
1. Connect USB storage device.
2. USB LED will show fast blinking.
3. During fast blinking, push this button.
4. Predefined USB Copy operation will be started.
5. During USB Copy operation, USB LED shows slow blinking.
NAS
I I I I
